Best Epoxy Flooring Alternative

Epoxy flooring has been around since the early 1950s when it was first introduced as a coating for concrete surfaces mostly for commercial flooring. Since then better techniques and technology have been developed like polyurea and polyaspartic concrete coatings. These coatings are made of two or more components mixed together before application. The resulting mixture creates a chemical reaction that causes the coating to cure and harden, creating a durable surface.
People have polyurea/polyaspartic floors installed in their basements, patios, porches, garages, and other concrete surfaces. The floors have been able to provide increased utility while also bringing style and even endless color options.
Why polyurea/polyaspartic floors are only an alternative but the better option in most cases


UV Resistant
When it comes to outdoor concrete areas that are exposed to sunlight, polyurea and polyaspartic coatings are a better option than epoxy coatings. The reason for this is that both polyurea and polyaspartic coatings are UV resistant. This means that will not fade or discolor when exposed to sunlight over time. On the other hand, epoxy coatings are not UV resistant. They can begin to yellow or fade over time, especially if they are exposed to direct sunlight.
The yellowing or discoloration of epoxy coatings is caused by a chemical reaction that occurs when the coating is exposed to UV light. Over time, this can cause the epoxy to break down, resulting in a yellowish tint or hue. This color can age the concrete’s appearance more quickly than an unprotected concrete floor. This will make the space look older and more worn than it actually is.
By contrast, polyurea and polyaspartic coatings are highly resistant to UV light, and do not yellow or fade when exposed to sunlight. This means that they can help to maintain the appearance of the concrete surface over time. Which will help in keeping it looking clean, bright, and new for longer.
Installation Temperature Range
Yes, one of the main benefits of polyurea and polyaspartic coatings is that they can be installed in a much wider range of temperatures compared to epoxy coatings. While epoxy coatings typically require installation temperatures of at least 55ºF (12ºC), polyurea and polyaspartic coatings can be installed in temperatures as low as -30ºF (-34ºC). This makes them ideal for use in colder environments, such as warehouses or manufacturing facilities that are not heated. Also in outdoor environments where the temperature may fluctuate widely. Additionally, the ability to install these coatings at lower temperatures means that they can be installed much faster. This reduces the overall project timeline and minimizes downtime.
Cure Time
Faster curing time: Polyurea and polyaspartic coatings have a faster curing time compared to epoxy coatings. This means that they can be installed and ready for use in a shorter amount of time. This can be especially important in commercial or industrial settings where downtime is costly. The fast curing time in contrast to Commercial epoxy flooring also means that the surface can be used and walked on within hours after the coating has been applied.
Better Chemical Resistance
Polyurea and polyaspartic coatings are highly resistant to chemicals, including acids, oils, and solvents. This makes them ideal for use in industrial or commercial settings where the floor may be exposed to chemicals as part of daily operations. Epoxy coatings, on the other hand, are susceptible to damage or discoloration from certain chemicals. By choosing a polyurea or polyaspartic coating, you can be sure that your floor will remain in good condition even in the face of regular exposure to chemicals.
Why Your1DayFloor?
After considering these facts, you may be considering searching “garage floor coating near me”. You will most likely find yourself looking at our Your1DayFloor and compare epoxy flooring costs to our options. Considering the overall better durability of polyurea and polyaspartic, the cost is slightly higher. But they will also last several times longer, long enough to where you’ll never have to worry about doing them again. Epoxy flooring costs may be cheap, but cheap quality is what you will get then.

In conclusion, polyurea and polyaspartic coatings are a superior alternative to epoxy flooring in many cases. They provide UV resistance, wider temperature ranges, faster curing times, and better chemical resistance. Although they may come at a slightly higher cost, the long-lasting durability and improved appearance they provide make them less costly in the long run. By choosing polyurea or polyaspartic coatings, you can be confident that your concrete surfaces will not only look great, but also stand up to the test of time. So why settle for a short-lived solution when you can invest in a better, more resilient option?
Give us a call today to schedule your free estimate!
Phone: (833) 969-1329
157 W North St, West Milton, OH 45383, United States