Epoxy Garage Floor Installers Near Me

There are many advantages of hiring professional epoxy garage floor installers. They have the correct tools and experience to open concrete pores to the correct depth. They also know how to remove moisture from the concrete slab, a critical step in ensuring that the sealant is applied correctly. This can save you from a costly do-over later on. If you’d rather try to do it yourself, you can read our guide on how to do it yourself.

Solid Epoxy is the Purest Form of Epoxy

A garage floor coating with a solid epoxy formula is one of the best ways to give your garage a durable and long-lasting finish. While traditional garage floor paint dries on the surface, a solid epoxy formula goes through a chemical reaction to form a thick coating. This coating is 10 times thicker than home-center epoxy, and it is tightly bonded to the floor surface, making it highly resistant to impact, chipping, and abrasion.

A garage epoxy floor kit applies a clear coat of epoxy to a concrete floor. The epoxy contains two components, each with a unique purpose. Once mixed, the two components dry to a strong and clear finish. Garage floors with solid epoxy finish are very durable and offer low-maintenance options. However, it takes longer to apply than a solid epoxy finish, so a high-quality garage floor kit is your best bet.

Solvent-Base Epoxy is a Less Expensive Option

There are a few different types of epoxy, and the cost will vary according to the type. Water-based epoxy is the least expensive option, with prices ranging from less than hundreds dollars per square foot. Solid epoxy, on the other hand, is three to four times more expensive. In addition to the cost of materials, you will have to prepare the surface for epoxy, which means you’ll need to rent a storage unit or hire a moving company to move everything.

Another type of epoxy is called 100% epoxy. This type of coating requires two coats, each 12 to 48 hours apart. It is an excellent choice if you’re a do-it-yourself, although you’ll likely need to hire a professional for the job. A typical garage epoxy floor is made of two layers, and if you’d like a metallic epoxy floor, you can choose a mix that contains copper flakes.

DIY Epoxy Garage Floor is Possible

Although a DIY epoxy garage floor installation is possible, the result may not be as impressive as that of a professional. The process is labor intensive and requires considerable strength, so professional installers usually use a team of professionals to complete the task. A DIY garage floor installation is also likely to be prone to costly mistakes. Because epoxy needs to adhere to a spotless surface, it is essential that the surface is thoroughly scored. Unfortunately, most do-it-yourselfers don’t know how to score the concrete properly, which can cause adhesion issues.

Before applying the epoxy, you must thoroughly clean the concrete floor and surrounding area. This means brushing off any loose dirt. If you apply too little, the epoxy may absorb into the concrete pores, losing its gloss. Then, a layer of epoxy flakes will cover the floor, adding a visually appealing surface pattern and improving slip resistance. After 3 days, the garage floor will be easy to clean. A DIY epoxy garage floor will require a bit of time, but the end result will be worth it in the long run.

Your1DayFloor
https://goo.gl/maps/Wnz3zP2TWQXRuaYH6
157 W North St, West Milton, OH 45383, United States
+1-833-969-1329
https://your1dayfloor.com/